• SECURITY PAPER
  • SECURITY PRINTINGS
  • COMPOSITES MATERIALS
  • WOVEN
  • NONWOVENS
  • > Proven and flexible inspection and traceability solutions for security documents:

    banknotes, ID, e-passeports…

    Lineavision® reliably allows to automatically inspect the quality during production and to continuously check for conformity at the paper making level and during insertion of various security features for paper securisation (OVD stamping, iridescent and OVI printing). According to the defect gravity, control of the rejection ratio is flexible. Lineavision® combines quality and productivity.

    Security features inspected:

    • Paper
    • Watermarks
    • Security threads
    • Electrotypes
    • OVD foil
    • Iridescent and OVI printing
    • Fibers…
    • Intaglio printing

    Linéavision® for fiduciary application at the paper-making level is optimally suited for:

    • Checks of all security features according to sheet position (synchronization in registry)
    • Controls of positions and dimensions of all security features
    • Detection of aspect defects with different sensitivities according to the sheet location
    • Provides inspection report per roll and sheet

    > Security printings inspection

    Lineavision® for security printings application allows to control either the printed sheets at any production steps, or the final banknotes for the batch validation.

    The inspection solution installed at Offset, Intaglio, OVI/ OVMI, and Numbering printings steps, guarantees the perfect quality and maintain the yield at the highest level.

    The final banknotes for the batch validation consists in higher resolution printing inspection, dimensional control and all other security features applied during the paper manufacturing.

     

    Lineavision® ensures:

    • Compliance with high secure market requirements,
    • Yield maximization and waste reduction,
    • Quality management & traceability.

    > Flexible printed Electronics high-resolution and traceability solutions

    IN-CORE Systèmes provides unique solutions for flexible printed circuits, based on its expertise in image acquisition. These applications require a very high resolution inspection to avoid short circuits and to ensure:

    • Precise building up of the layers,
    • Repetitiveness and regularity of the global printing and coating processes,…
    • Dimensional control of coated patterns (width positions, edge straightness, overlapping,etc)

    IN-CORE Systèmes solution for Flexible printed electronics helps to optimize the coating or printing processes, in order to achieve optimal module performance.

    Lineavision® IN-CORE Systèmes’ solutions optimally suited for manufacturers to:

    • Check in registry all printed features
    • Control positions, distances and dimensions of all printed features and layers
    • Detect aspect defects
    • Report inspection results per circuit and cell

    Control web registration, web tension and other web properties

    > High resolution inspection solution to control, measure and monitor all process parameters at each production step enhancing knowledge of critical process parameters

    As a global supplier of optical inspection solutions for OPV R2R or S2S manufacturing, we participate in the progress of finding solutions for particular issues. The economical and technical challenges of the OPV manufacturing process require producers to control, measure and monitor all process parameters at each production step.

    Lineavision® inspection solution is optimally suite for minimizing the number of defects on circuits in order to improve life time and efficiency:

    • Substrate surface inspection:
      • ITO plane or patterned surface regularity in R2R
         
    • Process inspection:
      • Precise layer stacking of functional layers: control of positions, regularity and dimensions of all printed/coated layers,
      • Geometrical patterns features measurements: position & registration, alignment, edge regularity, spacing
      • Shorts : conducting particle between layers
      • Coating defects   
      • Encapsulation defects
         
    • Traceability and optimal quality data processing management: track and trace the  defective circuits/modules, identify the origin of the defect, archive & consolidate all processed data.

    > High resolution inspection solutions for Lithium-ion, Lithium-polymer batteries:

    Electrodes (anode, cathode) & Separator

    Lineavision® for battery applications provides flexible inspection and measurement solutions: safety, efficiency and life time of the products are the biggest challenges.
    The inspection solutions guarantee the perfect quality of electrodes and separators, essential to ensure high capacity storage, fast recharging and long life cycle.

    Inspection solutions In-core Systèmes for Lithium-ion, Lithium-polymer batteries : Anode, Cathode and Separator quality monitoringIN-CORE Systèmes high-resolution solutions enable to:  

    • Ensure repetitiveness and regularity of the global process coating
    • Manage defects to optimize the production costs
    • Monitor the production quality

    Lineavision® for battery applications is optimally suited for manufacturers to:

    • Inspect the electrodes surface quality: raw material (foil defect, surface cleanliness),
    • Detect coating defects such as bubbles, agglomerates, coating free area (pinhole, etc.), scratches, streaks, inclusions around 20µm, etc...
    • Control of coated patterns (width positions, edge straightness, overlapping, skip coating etc...)
    • Increase cell performances

    The main applications are the new trends in automotive industries with HEV (hybrid electric vehicle), EV (electric vehicles), wind generators and solar farms.

    > Global defect management on high-performance composite materials:

    Carbon, Glass, Kevlar, Aramid, in UD or fabric structures

    Lineavision® for Aerospace applications is used to fulfill the quality standards of major aerospace manufacturers for defects which must be detected for security and safety reasons, traced and removed. Composites materials, and especially carbon surfaces, must be fully compliant with quality requirements in order to ensure that final products, such as the structural part of planes, reinforcements for aerospace, etc..., match a zero defect policy.

    IN-CORE Systèmes solutions are globally certified for pre-impregnated UD and woven fabrics dedicated to aerospace products:

    • Structural parts and wings for airplanes,
    • Propulsor for shuttles,
    • Helicopter blades,
    • Etc...

     

     

    > Global defect management for woven technical textile

    Lineavision® for woven technical textile inspection enables to have a close look at the technical textile surface manufacturing should it be plain or converted. Accurate quality management and process monitoring are performed  in a continuous way  and enable to catch all surface flaws, monitor textile structure distorsions and check surface flatness and homogeneity as well as  width regularity.

    Lineavision® inspection solution for woven technical textile is optimally suited for:

    • Weaving defects inspection: plain or jacquard weaves, pattern alignment
    • Finishing defects inspection 
    • Weft deviation inspection: weaving, coating, hot stamping process monitoring
    • Coating defects inspection
    • Contaminations inspection
    • Wrinkle, streaks, holes... Inspection

     

    Technical Textile Applications:

    • Automotive applications

     

    > Global defect management for Nonwovens materials

    Lineavision® for nonwoven inspection enables to have a close look at the surface material manufacturing should it be plain or converted. Accurate quality management and process monitoring are performed in a continuous way and enable to catch all surface flaws, monitor structure distorsions and check surface flatness and homogeneity as well as width regularity.

    Lineavision® inspection solution for nonwovens is optimally suited for:

    • Contamination detection
    • Weft deviation monitoring
    • Process variations inspection: coating, laminating, varnishing, graining, calendring, hot stamping defects,…
    • Wrinkle, streaks, holes, scratches, stains, folds… Inspection

    Nonwoven applications:

    • Healthcare and Hygiene
    • Automotive
    • Buildings

     

Enhanced traceability : T+Q

As a front player for quality control and full traceability of security paper and finished banknotes, through various techniques, equipment and algorithms, we use experienced vision engineering capabilities to enhance systems to their full potential. By implementing well-designed in-line vision systems and machine process control, feedback is enhanced to provide all the data needed. We have extensive capabilities in the particular field of  produced sheets at the security paper making level providing a reliable solution to the  banknote manufacturers.

IN-CORE Systèmes, marking and tracing flexible solution (MTS): 
localization and traceability in real time of all produced sheet at the paper making level:

  • Comprehensive code identification marking & reading solution
  • Full traceability with quality status at each process step
  • Flexible solution, highly adaptable to specific manufacturing processes
  • Data consolidation and alarms management